CPU Survey

[Lamron333]

Well here is my Pentium i7 - 950 Quad Core with Hyper-Threading:

Number of processors 1
Number of threads 8

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Thread 1 1
-- Core 1
-- Thread 0 2
-- Thread 1 3
-- Core 2
-- Thread 0 4
-- Thread 1 5
-- Core 3
-- Thread 0 6
-- Thread 1 7

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 4 (max 8)
Number of threads 8 (max 16)
Name Intel Core i7 950
Codename Bloomfield
Specification Intel(R) Core(TM) i7 CPU 950 @ 3.07GHz
Package (platform ID) Socket 1366 LGA (0x1)
CPUID 6.A.5
Extended CPUID 6.1A
Core Stepping D0
Technology 45 nm
Core Speed 3183.0 MHz
Multiplier x FSB 24.0 x 132.6 MHz
Rated Bus speed 2387.2 MHz
Stock frequency 3066 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 4-way set associative, 64-byte line size
L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 8 MBytes, 16-way set associative, 64-byte line size
FID/VID Control yes

Turbo Mode supported, enabled
Max non-turbo ratio 23x
Max turbo ratio 25x
Max efficiency ratio 12x
TDP Limit 130 Watts
TDC Limit 110 Amps
Core TDP 110 Watts
Uncore TDP 20 Watts
Power @ 12x 35 Watts
Power @ 13x 39 Watts
Power @ 14x 44 Watts
Power @ 15x 50 Watts
Power @ 16x 57 Watts
Power @ 17x 64 Watts
Power @ 18x 72 Watts
Power @ 19x 82 Watts
Power @ 20x 92 Watts
Power @ 21x 103 Watts
Power @ 22x 116 Watts
Power @ 23x 130 Watts
Max bus number 255
Attached device PCI device at bus 255, device 2, function 1
Attached device PCI device at bus 255, device 3, function 4

 

[Shonnie]

Oh well SSE2 is fine for me xD.
If it was made for me (Which isn't, it's made for us all) I would say go for SSE4.

 

[Sicron]

Get some perspective dude. When you want to know something about 10 people, and you just ask 1 of the 10 persons about his information. Of course that is not reliable information. But when you are asking 300,000 people, your information is pretty much accurate. Hell, most of the medicine you take when you are ill have probably been tested by fewer people. And take in account that these medicine will be shipped across the entire world. Do you really think that scientists, when researching certain stuff, evaluate more than 1% of the entire world population? No, because then they would have to hold a survey among more than 65 million people! 300,000 people in this case is more than enough.

For crying out loud, just see how many professional websites refer to the Steam survey: http://www.google.nl/search?q=bigge...&rls=org.mozilla:nl:official&client=firefox-a

 

[Spunky]

330,000 out of 25,000,000 is equivalent to 1/100. Basic math skills. Get some. Reporting on the Steam hardware survey and using it for practical purposes in games are two different things. Anybody can read back statistics, that doesn't make them accurate or reliable.

 

[Xentor]

here's mine.

Processors
-------------------------------------------------------------------------

Number of processors		1
Number of threads		4

APICs
-------------------------------------------------------------------------

Processor 0	
	-- Core 0	
		-- Thread 0	0
	-- Core 1	
		-- Thread 0	1
	-- Core 2	
		-- Thread 0	2
	-- Core 3	
		-- Thread 0	3

Processors Information
-------------------------------------------------------------------------

Processor 1			ID = 0
	Number of cores		4 (max 4)
	Number of threads	4 (max 4)
	Name			Intel Core 2 Quad Q9550
	Codename		Yorkfield
	Specification		Intel(R) Core(TM)2 Quad  CPU   Q9550  @ 2.83GHz
	Package (platform ID)	Socket 775 LGA (0x4)
	CPUID			6.7.7
	Extended CPUID		6.17
	Core Stepping		C1
	Technology		45 nm
	Core Speed		2838.4 MHz
	Multiplier x FSB	8.5 x 333.9 MHz
	Rated Bus speed		1335.7 MHz
	Stock frequency		2833 MHz
	Instructions sets	MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, EM64T, VT-x
	L1 Data cache		4 x 32 KBytes, 8-way set associative, 64-byte line size
	L1 Instruction cache	4 x 32 KBytes, 8-way set associative, 64-byte line size
	L2 cache		2 x 6144 KBytes, 24-way set associative, 64-byte line size
	FID/VID Control		yes
	FID range		6.0x - 8.5x
	Max VID			1.238 V

 

[Shonnie]

330,000 out of 25,000,000 is equivalent to 1/100. Basic math skills. Get some. Reporting on the Steam hardware survey and using it for practical purposes in games are two different things. Anybody can read back statistics, that doesn't make them accurate or reliable.

Well, that's what you think. We can't deny that.
But I suppose they should follow the very, not reliable, steam survey.

 

[zee]

someone posted saying he was a pentinum i7 950... @_@
are you on an older brothers pc or do you just prefer calling one of the worlds fastest processors a dinosaur?

 

[Psydoman]

My phenom 2 x4

Number of processors 1
Number of threads 4

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1
-- Core 2
-- Thread 0 2
-- Core 3
-- Thread 0 3

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 4 (max 4)
Number of threads 4 (max 4)
Name AMD Phenom II X4 940
Codename Deneb
Specification AMD Phenom(tm) II X4 940 Processor
Package Socket AM2+ (940)
CPUID F.4.2
Extended CPUID 10.4
Brand ID 13
Core Stepping RB-C2
Technology 45 nm
Core Speed 3013.3 MHz
Multiplier x FSB 15.0 x 200.9 MHz
HT Link speed 1808.0 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V
L1 Data cache 4 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 4 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 4 x 512 KBytes, 16-way set associative, 64-byte line size
L3 cache 6 MBytes, 48-way set associative, 64-byte line size
FID/VID Control yes
Min FID 4.0x
P-State FID 0xE - VID 0x14
P-State FID 0x7 - VID 0x1C
P-State FID 0x2 - VID 0x24
P-State FID 0x100 - VID 0x30

Package Type 0x1
Model 40
String 1 0x3
String 2 0x6
Page 0x0
TDP Limit 125 Watts
TDC Limit 104 Amps
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
Attached device PCI device at bus 0, device 24, function 4

 

[lrda]

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 4

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 2
-- Core 2
-- Thread 0 4
-- Core 3
-- Thread 0 6

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 4 (max 8)
Number of threads 4 (max 16)
Name Intel Core i5 750
Codename Lynnfield
Specification Intel(R) Core(TM) i5 CPU 750 @ 2.67GHz
Package (platform ID) Socket 1156 LGA (0x1)
CPUID 6.E.5
Extended CPUID 6.1E
Core Stepping B1
Technology 45 nm
Core Speed 3189.9 MHz
Multiplier x FSB 24.0 x 132.9 MHz
Rated Bus speed 2392.4 MHz
Stock frequency 2666 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, SSE4.1, SSE4.2, EM64T, VT-x
L1 Data cache 4 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 4 x 32 KBytes, 4-way set associative, 64-byte line size
L2 cache 4 x 256 KBytes, 8-way set associative, 64-byte line size
L3 cache 8 MBytes, 16-way set associative, 64-byte line size
FID/VID Control yes

Turbo Mode supported, enabled
Max non-turbo ratio 20x
Max turbo ratio 24x
Max efficiency ratio 9x

 

[Big Finish]

Duuh....I feel so outta place and backdated....I own a crappy Intel E5300..
Gotta upgrade I think..

 

[Darnell]

Here is mine.

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 2

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium D 940
Codename Presler
Specification Intel(R) Pentium(R) D CPU 3.20GHz
Package (platform ID) Socket 775 LGA (0x2)
CPUID F.6.2
Extended CPUID F.6
Core Stepping B1
Technology 65 nm
Core Speed 3200.0 MHz
Multiplier x FSB 16.0 x 200.0 MHz
Rated Bus speed 800.0 MHz
Stock frequency 3200 MHz
Instructions sets MMX, SSE, SSE2, SSE3, EM64T, VT-x
L1 Data cache 2 x 16 KBytes, 8-way set associative, 64-byte line size
Trace cache 2 x 12 Kuops, 8-way set associative
L2 cache 2 x 2048 KBytes, 8-way set associative, 64-byte line size
FID/VID Control no

 

[Damaera]

Can't believe I posted in this thread without showing my cpu infos

Anyways, I'm pretty sure Raven knows my specs, but I'll post my stuff just in case:

--

CPU-Z TXT Report
-------------------------------------------------------------------------

Binaries
-------------------------------------------------------------------------

CPU-Z version 1.53.1

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 2

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name Intel Pentium E2180
Codename Conroe
Specification Intel(R) Pentium(R) Dual CPU E2180 @ 2.00GHz
Package (platform ID) Socket 775 LGA (0x0)
CPUID 6.F.D
Extended CPUID 6.F
Core Stepping M0
Technology 65 nm
Core Speed 2000.0 MHz
Multiplier x FSB 10.0 x 200.0 MHz
Rated Bus speed 800.0 MHz
Stock frequency 2000 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 2 x 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 4-way set associative, 64-byte line size
FID/VID Control yes
FID range 6.0x - 10.0x
Max VID 1.213 V

 

[Boogyman93]

Processor 1 ID = 0
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name AMD Athlon 64 4000+
Codename Orleans
Specification AMD Athlon(tm) 64 Processor 4000+
Package Socket AM2 (940)
CPUID F.F.3
Extended CPUID F.5F
Brand ID 4
Core Stepping
Technology 90 nm
Core Speed 2742.7 MHz
Multiplier x FSB 13.0 x 211.0 MHz
HT Link speed 1054.9 MHz
Stock frequency 2600 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64, AMD-V
L1 Data cache 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
Max FID 13.0x
Max VID 1.300 V
P-State FID 0x2 - VID 0x12
P-State FID 0xA - VID 0x10
P-State FID 0xC - VID 0x10
P-State FID 0xE - VID 0x10
P-State FID 0x10 - VID 0x0E
P-State FID 0x12 - VID 0x0C

K8 Thermal sensor yes
K8 Revision ID 5.3
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3

Don't laugh. I know it sucks
I'm planing to buy a new PC this summer. I hope I'll have the money...
https://www.pcgarage.ro/cos/

 

[Kunio]

CPU-Z TXT Report
-------------------------------------------------------------------------

Binaries
-------------------------------------------------------------------------

CPU-Z version 1.54

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 2

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Core 1
-- Thread 0 1

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name AMD Athlon II X2 245
Codename Regor
Specification AMD Athlon II X2 245
Package Socket AM3 (938)
CPUID F.6.2
Extended CPUID 10.6
Brand ID 13
Core Stepping DA-C2
Technology 45 nm
Core Speed 3505.8 MHz
Multiplier x FSB 14.5 x 241.8 MHz
HT Link speed 1208.9 MHz
Stock frequency 2900 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 2 x 1024 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
FID range 4.0x - 14.5x
Max VID 1.425 V
P-State FID 0xD - VID 0x0A - IDD 23 (14.5x - 1.425 V)
P-State FID 0x6 - VID 0x12 - IDD 20 (11.0x - 1.325 V)
P-State FID 0x1 - VID 0x1A - IDD 19 (8.5x - 1.225 V)
P-State FID 0x100 - VID 0x22 - IDD 7 (4.0x - 1.125 V)

Package Type 0x1
Model 45
String 1 0x3
String 2 0x6
Page 0x0
TDP Limit 31 Watts
TDC Limit 23 Amps
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
Attached device PCI device at bus 0, device 24, function 4

 

[dbzrogue]

CPU-Z version 1.53.1

Processors
-------------------------------------------------------------------------

Number of processors 1
Number of threads 2

APICs
-------------------------------------------------------------------------

Processor 0
-- Core 0
-- Thread 0 0
-- Thread 1 1

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 1 (max 1)
Number of threads 2 (max 2)
Name Intel Pentium 4 640
Codename Prescott
Specification Intel(R) Pentium(R) 4 CPU 3.20GHz
Package (platform ID) Socket 775 LGA (0x4)
CPUID F.4.3
Extended CPUID F.4
Core Stepping N0
Technology 90 nm
Core Speed 2800.6 MHz
Multiplier x FSB 14.0 x 200.0 MHz
Rated Bus speed 800.2 MHz
Stock frequency 3200 MHz
Instructions sets MMX, SSE, SSE2, SSE3, EM64T
L1 Data cache 16 KBytes, 8-way set associative, 64-byte line size
Trace cache 12 Kuops, 8-way set associative
L2 cache 2048 KBytes, 8-way set associative, 64-byte line size
FID/VID Control yes
FID range 14.0x - 16.0x
VID range 1.116 V - 1.420 V

This probably won't be able to run ESF 1.3...

 

[KarrdeKNR]

Depending on what GPU you have you might be able to run it on lowest settings.

 

[TAKHAR5000]

mine

i run on a laptop lol, it works nicely though.

Processor 1 ID = 0
Number of cores 1 (max 1)
Number of threads 1 (max 1)
Name Intel Celeron 900
Codename Penryn
Specification Intel(R) Celeron(R) CPU 900 @ 2.20GHz
Package (platform ID) Socket P (478) (0x7)
CPUID 6.7.A
Extended CPUID 6.17
Core Stepping R0
Technology 45 nm
Core Speed 2194.6 MHz
Multiplier x FSB 11.0 x 199.5 MHz
Rated Bus speed 798.0 MHz
Stock frequency 2200 MHz
Instructions sets MMX, SSE, SSE2, SSE3, SSSE3, EM64T
L1 Data cache 32 KBytes, 8-way set associative, 64-byte line size
L1 Instruction cache 32 KBytes, 8-way set associative, 64-byte line size
L2 cache 1024 KBytes, 4-way set associative, 64-byte line size
FID/VID Control no
.

 

[Soylent]

Hi, I was looking for the steam survey over CPU extensions, as it appears they've stopped reporting it, and came across this forum.

I registered just to say that Spunky is a blithering idiot and should refrain from opining about statistics. The standard error for a simple random sample is sqrt(p*(1-p)/n), where p is the reported percentage and n the number of samples.

Note that the size of the total population is irrelevant.

Also note that if you put in n = 330000 people and p = 0.988 you get 0.02%.

A survey of a couple of hundred randomly chosen people would tell you with acceptable error bounds that nearly everyone had SSE2.

 

[It's over One Million!]

I see most people have CPUs with SSE3 support. Does SSE3 code work better than SSE2 (for game performance)?

 

[DiebytheSword]

Hi, I was looking for the steam survey over CPU extensions, as it appears they've stopped reporting it, and came across this forum.

I registered just to say that Spunky is a blithering idiot and should refrain from opining about statistics. The standard error for a simple random sample is sqrt(p*(1-p)/n), where p is the reported percentage and n the number of samples.

Note that the size of the total population is irrelevant.

Also note that if you put in n = 330000 people and p = 0.988 you get 0.02%.

A survey of a couple of hundred randomly chosen people would tell you with acceptable error bounds that nearly everyone had SSE2.

Welcome to the forums, please keep a civil tone during your stay. There are nicer ways to say GuyX was wrong than GuyX is an idiot.

And since I'm here:

AMD Phenom II 1100T x6

Processors Information
-------------------------------------------------------------------------

Processor 1 ID = 0
Number of cores 6 (max 6)
Number of threads 6 (max 6)
Name AMD Phenom II X6 1100T
Codename Thuban
Specification AMD Phenom(tm) II X6 1100T Processor
Package Socket AM3 (938)
CPUID F.A.0
Extended CPUID 10.A
Core Stepping PH-E0
Technology 45 nm
TDP Limit 126 Watts
Core Speed 3311.2 MHz
Multiplier x FSB 16.5 x 200.7 MHz
HT Link speed 2006.8 MHz
Stock frequency 3300 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, SSE4A, x86-64, AMD-V
L1 Data cache 6 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 6 x 64 KBytes, 2-way set associative, 64-byte line size
L2 cache 6 x 512 KBytes, 16-way set associative, 64-byte line size
L3 cache 6 MBytes, 48-way set associative, 64-byte line size
FID/VID Control yes
Min FID 4.0x
P-State FID 0x15 - VID 0x06 - IDD 16 (18.50x - 1.475 V)
P-State FID 0x11 - VID 0x0C - IDD 16 (16.50x - 1.400 V)
P-State FID 0x9 - VID 0x10 - IDD 12 (12.50x - 1.350 V)
P-State FID 0x1 - VID 0x14 - IDD 9 (8.50x - 1.300 V)
P-State FID 0x100 - VID 0x1A - IDD 5 (4.00x - 1.225 V)

Package Type 0x1
Model 10
String 1 0x0
String 2 0x1
Page 0x0
CmpCap 6
ApicIdCoreSize 8
TDC Limit 96 Amps
Max non-turbo ratio 16.50x
Max turbo ratio 18.50x
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3
Attached device PCI device at bus 0, device 24, function 4