Help please i cant run my esf resolution in lower than 600

[EnigmaHer0]

the fastest way i could run my esf was in d3d in a resolution lower than 600 in other modes it lags it doesnt even run in opengl and in software in lags i already tried updatin my vid. card but thats wat made my comp not be able to run esf in d3d in less than 600 resolution so please help

 

[DiebytheSword]

What's your system stats?

 

[Smith|]

Check to make sure all background programs that arent needed are shutdown, including Kazaa. If all else fails, you can try to overclock your video card/processor. I dont recommend it, but it helped me a little (www.extremeoverclocking.com).
-UltraPerfectCel

 

[EnigmaHer0]

maybe i can restore my pc to the day before i updated my vid. card? it used to work before i updated if that doesnt work then please help me find another solution or the u guys think i should just try reinstalling halflife and esf

 

[Phatslugga]

maybe you should continue these posts in the original thread you made of this problem.

 

[EnigmaHer0]

first of all im not even talkin to u slugga and y should u give a f*ck man go somewere else im tryin to ask members for help .SO NYWAYZ members wat do u i should do, try reinstalling esf and halflife or should i do a system restore wat help

 

[DiebytheSword]

You should tell us what Video card you have for starters . . . that's the only way we can help.

 

[EnigmaHer0]

my vid card is an SiS

 

[DiebytheSword]

Integrated?

D3D should not be run in less than 600x480, that's the smallest you can go without errors in OGL too. You should actually upgrade your vid card to a PCI model if you have to.

What OS are you using, if you have WinXP you can attempt a driver rollback, otherwise, unistall the software and reinstall it with the older driver. You're slow framerate is beacuse of the poor GPU that SiS uses, you won't do much by running it in a lower res.

 

[Smith|]

Steps to Identifying Video Card :
1 : Right click on your desktop.
2 : Goto settings.
3 : Look for this... and thats it.

-UltraPerfectCel
[EDIT]I agree with Cuc.

 

[EnigmaHer0]

it ran pretty good in d3d and in less than 600 resolution trust it ran like in 25fps which is good for me now how do i upgrade it to a pci model?

no i have windows me also i dont understand wat u mean by this"unistall the software and reinstall it with the older driver" how do i do it?

 

[EnigmaHer0]

a little help?

 

[DiebytheSword]

That's something a little indepth, you may have to bring your comp to a professional to have it upgraded fixed. If you don't understand it, your likely to mess your system up more by trying to fix it.

 

[EnigmaHer0]

no dude ill understand im good at this u just got to explain how do i upgrade it to pci?

ps.im thinkin of buyin a new vid. card which one would u reccomend members?

 

[DiebytheSword]

That's what I was talking about, buying a new video card. Get a GeForce MX, it's your best bet ATM. What main processor do you have?

 

[EnigmaHer0]

were do i find my main proccesor? and bout how much is it

ps.could u tell me how to install models please the forums dont explain ****

 

[DiebytheSword]

Processor being the main cpu, like Intel Pentium 4, or AMD Athlon XP 2500+. You should have some documentation, or you can look in my computer's properties to find it. A GeForce can cost ya, but if you have a slow processor you can safely get an old one for a bit of a boost.

 

[EnigmaHer0]

and the models how do u install them? were do i look to find my comp. proccesor

ps. i have an intel celerron proccesor windowse me esf runs pretty good in software mode so with a new gfx card itll run better in d3d or opengl right?

 

[DiebytheSword]

Right, get a GeForce2 MX, it's cheap, but it'll do the trick. The celeron is your processor. The models install in your models directory, and you can either overwrite the original model, or simply type a command in the console to change them, I don't remember the c_var at the moment.

 

[EnigmaHer0]

ok so im downloadin a trunks right now the first thing i did is create a folder called unwanted models in my documents i went to esf-models-players and got both normal and ssj trunks and put them in that folder then i got the new trunks and i just but both the normal trunks and ssj trunks folders in the players folder did i do this right?

ps.bout how much is the card (estimate) and is it hard to install?

please answer