Dedicated Server Not Listing on Steam

Active Member
✔️ HL Verified
💻 Oldtimer
Joined
Oct 27, 2002
Messages
1,185
Best answers
0
I'm trying to make a dedicated server, but the server is not being listed on Steam's server list.

The ports are properly open (I've checked them using a program).
I have sv_lan set to 0.
I have sv_region set to 1.
I have steam_appid.txt in the ESF folder inside the HLServer folder with the setting 70.
The following is what is shown when the server starts:

Setmaster: Unknown command enable
Connection to Steam servers successful.
VAC secure mode is activated.
] status
hostname: Optional's Dojo - Pittsburgh, PA
version : 48/1.1.2.1 4554 secure (70)
tcp/ip : 192.168.1.3:27015
map : esf_riverside at: 0 x, 0 y, 0 z
players : 0 active (12 max)

# name userid uniqueid frag time ping loss adr
0 users
The ip listed is my computer's internal ip. I can join the server by adding my external ip to favorites and joining like that. I believe the problem stems from "Setmaster: Unknown command enable," but I have yet to find anything that works on Google.

Any help?

Edit: The server is still up. The ip is 71.206.238.33:27015 .
 
Last edited:
Base belongs to me.
👑 Administrator
🌠 Staff
✔️ HL Verified
🚂 Steam Linked
💎Légéñdārý
Joined
Nov 30, 2002
Messages
10,867
Best answers
0
Location
Netherlands
I can see your server just fine through HLSW: 71.206.238.33:27015 Optional's Dojo - Pittsburgh, PA

So at least that works ^_^.
 
Active Member
✔️ HL Verified
💻 Oldtimer
Joined
Oct 27, 2002
Messages
1,185
Best answers
0
But it doesn't show up in Steam. The server will be forever empty. :(

Edit: There are absolutely no server mods running (like amx etc)
 
Active Member
✔️ HL Verified
💻 Oldtimer
Joined
Oct 27, 2002
Messages
1,185
Best answers
0
Trex has solved all my problems.

Lessons learned: use port forwarding and not DMZ. Make sure weird built in router firewalls are off. Take Trex's files. They are like magix n stuff.
 
TREX
🌠 Staff
🌈 Beta Tester
★ Black Lounger ★
✔️ HL Verified
Joined
Dec 31, 2004
Messages
150
Best answers
0
Location
Canada
We took this problem and DESTROYED IT!! If anybody else needs help with this kind of thing well ring me up, this is my annual post on here, TREX going back out. I'll try to be around more often.
 
Last edited:
NOT IN THE MANGA™
★ Black Lounger ★
✔️ HL Verified
🚂 Steam Linked
💻 Oldtimer
Joined
Jan 5, 2008
Messages
3,276
Best answers
0
Location
Lithuania
DProto does the trick too, plus the other useful stuff, like lowering svc_bad.
 
New Member
Joined
Dec 6, 2009
Messages
1
Best answers
0
i am facing the same problem.yesterday this problem started for me and i yet havent found a clue.plz help me out here..my sv is for condition zero.
this is how it shows in gui mode
Setmaster: Unknown command enable
Menu item 18 added to Menus Front-End: "Plugin Cvars" from plugin "pluginmenu.amxx"
Menu item 19 added to Menus Front-End: "Plugin Commands" from plugin "pluginmenu.amxx"
Connection to Steam servers successful.
VAC secure mode is activated

and this is how it shows in console mode
protocol version 58
steam auth server
adding master server 69.28.151.162:27010
adding master server 72.165.61.189:27010
Connection to Steam servers successful.
VAC secure mode is activated.

i cannot find it at any cost.i can c my server on in my fav,thats about it .wat is the issue? i havent changed any cfg file or anything.no changes in port fowarding as well.i reinstalled the whole sv and yet same issue.
 

Users who are viewing this thread

Top Bottom