shield

New Member
💻 Oldtimer
Joined
Nov 5, 2003
Messages
1,049
Best answers
0
1.i noticed that if the blast is too strong the shield has no effect and it crashes the server...but i still use the shield all the time. And i use that attack where u can absorb the attack and shoot it back ect... i was thinking....its pretty pointless, it does what, 1/10 of the damage? pointless...should be more like 1/2 =D because its a good attack it just needs to be stronger!

2.i dont think that if 2 ppl are in a gen beam struggle, if 1 person is losing, when the ps hits them, it shouldnt kill them. A generic beam struggle should take more than 2 generic beams to kill someone

thats it =þ
 
Moving with Sonic Speed
Retired Forum Staff
✔️ HL Verified
💻 Oldtimer
Joined
Jan 9, 2003
Messages
4,534
Best answers
0
The shield does way more than 1/10th damage. Just let someone hit you with a fully charged kame, so long as they aren't way over your power level, then fire it back.

And beam struggles are beam struggles, not to be classified as either generic or special or massive or anything else. The more ki you put into a struggle the more dangerous it becomes, regardless of the initial attack. More ki means more dangerous means more damage.
 
New Member
💻 Oldtimer
Joined
Nov 5, 2003
Messages
1,049
Best answers
0
yeah but a weak beam struggle still kills people in 1 hit hwen it shouldnt
 
Moving with Sonic Speed
Retired Forum Staff
✔️ HL Verified
💻 Oldtimer
Joined
Jan 9, 2003
Messages
4,534
Best answers
0
Think about Majin Vegeta vs. SSj2 Goku. Near the end of that battle they do a generic beam struggle that grows so large in time that it blows a massive crater in the ground when it detonates between them. Imagine if it had detonated on top of one of them.
 
Active Member
💻 Oldtimer
Joined
Aug 21, 2002
Messages
1,932
Best answers
0
1. the strength of shield attack is based on the Gohans PL ... absorbing attacks just speed the charging up (alot)
if an attack is too strong, Gohan can't hold the shield and it disappers ... sometimes it's crashing ... but personally I think it's cause betatesters doesn't test linux servers

I blew up whole levels with shield attack ... it's a really strong attack

2. probaly they don't get killed ... the more KI the use (the longer the PS exists) the stronger the beams get ... so it the PS has finished afte 3 secs the loser (probaly) won't get killed ... as in DBZ
 
New Member
Joined
Nov 29, 2002
Messages
538
Best answers
0
No, the main reason for Generic beam struggles being so huge is this.

All the beams have a certain amount of power that you can put in them per second.
It seems that the weaker the beam is when fully charged, the faster you can pump ki into it. This could be a by product of their charging time, or it could be on purpose.

Try it. It's hard to get anything as large as the explosion from two evenly matched yellow attacks.
For example, given a little time, a generic beam will quickly overpower a kamehameha, as long as there is room for the generic beam to have enough ki pumped into it. The Kame (being such a large attack when fully charged) can't keep up with the rate at which the ki is pumped into the generic bream.
Gallit Gun is very close to generic beam in this respect.

This is why generic beam struggles between two super saiyans for example will usually cover the entire map.
 

Users who are viewing this thread

Top Bottom